General
General questions about the PTZoptics camera line.
This is a guide I put together that goes over a (2) camera system setup to stream and record. It goes over everything you would need to get your system up a...
Mon, 20 Feb, 2017 at 2:32 PM
The PTZOptics cameras are a Class 3 "Mid-Power" device using 802.3af. The average load usually falls between 7 - 9 Watts in testing during actual...
Wed, 15 Mar, 2017 at 10:12 AM
please refer to attached document for information on a church setup with PTZ optics cameras.
Fri, 16 Jun, 2017 at 10:32 AM
If you own multiple PTZOptics cameras, you can set each one to be controlled independently from (1) IR remote control. The way to do this is to use the IR r...
Thu, 23 Aug, 2018 at 11:26 AM
Yeah we do, you can find the PDF and DXF files attached below.
Thu, 25 Oct, 2018 at 8:36 AM
This video should go over the various ways you can try to color match your PTZOptics cameras. https://live.ptzoptics.com/back-to-the-basics/color-match...
Mon, 29 Oct, 2018 at 11:23 AM
Please refer to the chart below for the new dial positions for the system select dial after the broadcast firmware update. In order to change the framerate/...
Wed, 29 Sep, 2021 at 9:40 AM
The first thing you would need is your cameras to be on the most recent firmware. This feature was added to our camera line in early to mid 2019 so getting ...
Fri, 21 Jun, 2019 at 12:12 PM
The PT JOY G3 uses port 1259 for UDP and 5678 for TCP control. There are actually the ports assigned to the cameras themselves, so when using a PTZoptics ca...
Thu, 18 Jul, 2019 at 10:08 AM