Camera Issues
All known issues you may run into while using your camera.
This issue may occur if you add USB devices to a USB hub while you stream video with a USB camera that is connected to the same USB hub (Internal or externa...
Mon, 30 Nov, 2015 at 7:25 AM
Below is a comparison image between the HDMI or SDI outputs (16:9) and the Composite Video (CVBS) output (4:3)
There is no way to modify the aspect...
Wed, 17 Feb, 2016 at 6:56 AM
It is fairly common that someone may not be able to find their cameras from the IP address setting tool, even when the camera and the computer are on th...
Mon, 19 Apr, 2021 at 4:34 PM
Yes we can. The Decimator MD-HX is a fantastic little device that will let you change the framerate and resolution of any HD-SDI or HDMI signal. The setup i...
Mon, 19 Apr, 2021 at 4:41 PM
If you need to change the resolution of the camera, it is done through the On Screen Display of your PTZOptics VL Zcam. The only output the OSD will show up...
Mon, 19 Apr, 2021 at 5:06 PM
The focus of the PTZOptics cameras can go out over time or with a firmware upgrade. This should be completely fixable and only takes a few minutes per unit ...
Thu, 3 Mar, 2022 at 11:19 AM
This article would not be relevant for any NDI or SDI cameras with PoE and is only relevant to USB and Non-Poe cameras. for all newer cameras make sure ...
Thu, 30 Jun, 2022 at 10:30 AM
If lights appear to flicker or dance when looking at the video feed from your PT30X camera, you may need to change the anti-flicker options in the cameras O...
Mon, 19 Apr, 2021 at 2:56 PM
This is common issue with the PTZOptics cameras. This issue occurs because the anti-flicker setting built into the PTZOptics cameras comes set to be 60...
Tue, 20 Apr, 2021 at 2:30 PM
The Zcam models use non-isolated POE. The Zcams cannot have the SDI connection being used at the same time as the POE. If they are, the camera will shu...
Tue, 20 Apr, 2021 at 4:41 PM