Camera Control
Control for PTZ of cameras
This can easily be done through RS-232 connections or RS-485 connections, but this guide will take you through the RS-232 method of hooking this up. You wi...
Mon, 5 Apr, 2021 at 1:59 PM
Hello AV & IT Pros!
In this video Paul Richards reviews, how to download and run the PTZOptics Open Source Camera Control Software which is made ...
Sun, 3 Jan, 2016 at 2:42 PM
You can control the camera in the following ways: IR remote control - Included with each camera. Hardware Joystick - The cameras can be controlled usin...
Thu, 17 Jun, 2021 at 4:47 PM
This is the pinout of our cascade cables. Pins 1 and 2 are swapped, and pins 3 and 5 are swapped. Pins 6,7, and 8 and not used.
Mon, 14 Jun, 2021 at 10:48 AM
Yes you are able to set a preset from the IR Remote and recall that same preset from the WebUI. These operations also work in reverse allowing you to s...
Fri, 3 Apr, 2020 at 11:07 AM
Gen 2 Serial Controller: If you need to open the OSD (On Screed Display) of your camera using the serial joystick you can do this by calling preset 9...
Mon, 5 Apr, 2021 at 3:21 PM
If, when setting up your HC-Joy (serial joystick) with your gen 2 cameras, you are having issues daisy chaining with RS-232 please follow the following the ...
Mon, 5 Apr, 2021 at 5:52 PM
PTZ Optics now offers a plugin for OBS to allow for control of your cameras over a network. The download for this app can be found in the link HERE: https:/...
Mon, 5 Apr, 2021 at 3:33 PM
There are plenty of adapters out there that will accomplish this allowing you to extend your cascade connection using CAT cable. The link below is for a set...
Mon, 26 Apr, 2021 at 1:48 PM
There are a few options for "remote" IP control of the cameras using either PTZOptics VISCA over IP or HTTP-CGI commands. Here is some insight...
Fri, 13 May, 2022 at 12:19 PM