Huddlecam control

Everything having to do with controlling your camera using joysticks, computers, as well as control systems.

Where can I find all the Visca control commands for your cameras?
You can view all Visca commands from our resource page... (http://huddlecamhd.com/wp-content/uploads/2014/04/HuddlecamHD-VISCA-Command_.pdf)
Thu, 28 May, 2015 at 9:04 AM
Serial Control (e.g. RS232, RS485, VISCA)
Serial control allows remote PTZ, preset calling/setting and other control from 3rd party devices (e.g. joystick, Crestron) or so...
Thu, 28 May, 2015 at 8:54 AM
How do I control multiple HuddleCams using the HuddleCam PTZ Joystick Controller?
This can easily be accomplished using RS-232 via Serial (DB9) and VISCA connections; you will need VISCA Cascade cable(s) (1 per each extra camera after t...
Thu, 23 Jun, 2016 at 9:54 AM
Can I control my Camera from my PC?
* please note this is article refers to a free software that has other uses with the huddle cams and not just controls so this software is called debugger t...
Fri, 27 Jul, 2018 at 4:14 PM
I Need to hook up my Huddlecam to an HC-Joy in Pelco-D, can I do that?
Yes you can. There are a few different things that you will need to do so I will go over them one at a time. 1. The first thing would be to locate...
Wed, 9 Mar, 2016 at 12:01 PM
How do I set the VISCA address of my camera?
 3X / 3X-G2 / 10X-720 / 10X Camera ID Configuration Look for the DIP switches on the bottom of the camera in the "SW1" group of DIP swit...
Fri, 18 Mar, 2016 at 11:15 AM
I have a Huddlecam but I need to control it over my network, is that possible?
This is entirely possible. There are many devices on the market that can handle VISCA over IP but the one that I will be explaining today would be the Sta...
Tue, 31 May, 2016 at 12:50 PM
I Need to know the pinout of you rs-232 cable that comes with the camera?
The standard pinout of our included DB9 to mini din cable is below. This cable is used to connect the Huddlecam from a joystick or control system. If you ...
Thu, 22 Sep, 2016 at 3:34 PM
What is the pinout for your VISCA cascade cable?
Mon, 7 Nov, 2016 at 10:02 AM
Flipping your Huddlecam for a ceiling mount.
In order to flip the image on your huddlecam you need to press the "Rev" at the bottom of the IR remote control.
Fri, 9 Dec, 2016 at 11:08 AM