NewTek TriCaster Controller Installation

  1. Use the included USB A-B cable to connect the TallyLights™ Controller to your computer.
  2. Download the NewTek Tricaster TallyLights™ Controller software.
  3. Install the software using the wizard.
  4. By default, the install wizard creates the following folder when utilizing a TriCaster video mixer.

NewTek TriCaster Controller Configuration

    1. Power up the NewTek Tricaster.
    2. Add the cameras to the first 8 inputs of your NewTek TriCaster.
      • The cameras must be set to the first 1-8 sources to ensure compatibility with the controller.
    3.  Setup is complete. The emitters will now trigger when set to Program and Preview through NewTek TriCaster.