Setting a Preset:
  1. Start by making sure the camera is powered and the USB connection has been established. Please be sure you are using a USB 3.0 port if you have a USB 3.0 camera.
  2. Navigate the camera to the position you wish to create a preset for
  3. Click on the preset number you wish to assign [1-9] to the current location
  4. Click on the “Set” button
Calling a Preset:
  1. Start by making sure the camera is powered and the USB connection has been established.
  2. Click on the preset number you wish to call [1-9].
  3. Click on the “Call” button.
  4. The camera will move to the requested preset location.
Clearing a Preset:

Please note that you can ALWAYS set a preset over an existing preset; however if you truly wish to clear a preset button follow the steps below

  1. Start by making sure the camera is powered and the USB connection has been established
  2. Click on the preset number you wish to clear [1-9]
  3. Click on the “Clear” button