1. For masonry or drywall wall:Position on wall and mark wall for anchor placement. Pre-drill1/4 holes, minimum 1 deep.For double gang electrical box:Position over box with slots overlaying device mounting holes inbox.
  2. For masonry or drywall wall:Place included anchors in wall and mount to anchors using included#10 screws.For double gang electrical box:Mount to box using #6 screws and washers provided.
  3. Drill hole in wall through rear exit opening for cable access, or use base exit opening.
  4. Mount camera to mount with included ΒΌ-20 screw.Utilize (0, 1 or 2) 1/4 washers as required, depending upon depth of threaded insert in base of the camera, in order to achieve a snug fit. Connect all cables.